Twotrees — Totem 60P
Laser engraving machine with a rectangular frame of an aluminium alloy, with a laser head which can work a surface of approximately 30 cm x 30 cm. The machine lacks a casing. Product sold online, in particular via AliExpress with the online identifier 1005003189584181.
- Risk level
- Serious risk
- Tyyppi
- Damage to sight
- Luokka
- Machinery
- Vaara
- The product does not have a protective housing that prevents access to laser radiation, no manual reset nor key-operated main switch, and lacks an emission warning device. In addition, the laser does not switch off in the event of vibration or impact and the engraving programme continues to run autonomously after interruption and restoring of power supply. Furthermore, the product is mis-labelled as Class 3 laser but should be considered as a Class-4 laser, lacks a machine type plate, and has no operating instructions in the national language. Users' or bystanders' eyes may be directly exposed to the laser light, resulting in damage to the eyesight.
- Origin
- Unknown
⚖️ Toimenpiteet viranomaisten määräämässä järjestyksessä
- ▸ Measures ordered by economic operators (to: Other) Withdrawal of the product from market
What is this? This is a laser engraving machine called Twotrees Totem 60P. It is unsafe because it can expose users or bystanders to strong laser light.
What's happening? The machine has serious safety flaws. It lacks proper protection, warnings, and controls. It may keep running even after power is restored.
Does this affect me? If you own or use this machine in Germany, you could be at risk of eye damage from the laser.
What should I do? Stop using the machine right away. Ask a doctor or pharmacist for advice before handling it again.
🤖 Tämä selkeäsanainen yhteenveto on tuotettu viranomaisen ilmoituksesta tekoälyä käyttäen. Se on tarkoitettu yleisluontoiseen tiedottamiseen — ei lääkärinlausunto. Terveydestäsi päättäessäsi ota aina yhteyttä apteekkiin tai lääkäriin ja lue alla oleva virallinen lähde.
🔬 Lääketieteelliset / tekniset tiedot ammattilaisille
Risk level: Serious risk · Type: Damage to sight · Category: Machinery · Hazard: The product does not have a protective housing that prevents access to laser radiation, no manual reset nor key-operated main switch, and lacks an emission warning device. In addition, the laser does not switch off in the event of vibration or impact and the engraving programme continues to run autonomously after interruption and restoring of power supply. Furthermore, the product is mis-labelled as Class 3 laser but should be considered as a Class-4 laser, lacks a machine type plate, and has no operating instructions in the national language. Users' or bystanders' eyes may be directly exposed to the laser light, resulting in damage to the eyesight. · Origin: Unknown
Kaikki tämän sivun tiedot perustuvat virallisen viraston tiedotteeseen. Käännämme ja tiivistämme ne; emme lisää tai muokkaa faktoja.