VW — ID.Buzz
Passenger car.
- Risk level
- Serious risk
- Typ
- Injuries
- Kategori
- Motor vehicles
- Fara
- The screw connection of the rod end and of the control arm may be defective on one side of the front axle. The nuts of the control arm may have been used to fasten the rod ends, and the nuts of the track rod may have been used to fasten the control arm. When braking or accelerating, a loss of pre-tensioning force may occur and consequently the nuts may loosen due to the lack of ribbing. Over time, bolts on the ball joint or the control arm may break off once the nuts on the control arm have loosened. This causes a risk of accident.
- Origin
- Germany
⚖️ Åtgärder ordnade av myndigheter
- ▸ Measures ordered by economic operators (to: Manufacturer) Recall of the product from end users
What is this? This is about a problem with some VW ID.Buzz cars. A part on the front wheel may not be put together correctly.
What's happening? The nuts that hold the front wheel parts may be loose. This could make bolts break while driving. This could cause an accident.
Does this affect me? This affects some VW ID.Buzz cars in Germany and Sweden.
What should I do? Take your car to a VW dealer right away. Ask your dealer or a mechanic to check it.
🤖 Denna lättläst sammanfattning har genererats automatiskt från myndighetens officiella meddelande med hjälp av AI. Informationen är endast avsedd för allmän kännedom — inte som medicinsk rådgivning. För beslut om din hälsa, rådfråga alltid apotekspersonal eller läkare och läs den officiella källan som länkas nedan.
🔬 Medicinska/tekniska detaljer för yrkesverksamma
Risk level: Serious risk · Type: Injuries · Category: Motor vehicles · Hazard: The screw connection of the rod end and of the control arm may be defective on one side of the front axle. The nuts of the control arm may have been used to fasten the rod ends, and the nuts of the track rod may have been used to fasten the control arm. When braking or accelerating, a loss of pre-tensioning force may occur and consequently the nuts may loosen due to the lack of ribbing. Over time, bolts on the ball joint or the control arm may break off once the nuts on the control arm have loosened. This causes a risk of accident. · Origin: Germany
All information på denna sida kommer från den officiella myndighetsnotisen. Vi översätter och sammanfattar den; vi lägger inte till eller ändrar fakta.
